Sufficient light is integral to obtaining the quality 360° images needed for your 360° Tour and, ultimately, your sketch:
- Be sure to turn on available light sources.
- If there is no power, the yellow LED lamp in the hardware kit will help. This lamp is surprisingly bright with three brightness levels.
- Use the lamp by hand to flash light toward the area where the 360° image is to be taken.
- You can also use the hook that extends from the top of the lamp to attach it to your tripod under the camera, as indicated in the photo below:
.png?sv=2022-11-02&spr=https&st=2026-03-07T21%3A41%3A13Z&se=2026-03-07T21%3A52%3A13Z&sr=c&sp=r&sig=x9hX%2FOE%2Bb%2BzBj2MrfdbMeb8vYXci25pSylZgu7WqpqM%3D)
- There is also a magnet on the back of the light. Use this to attach the light to a metal object, such as a metal clipboard.
- The light can also be used as a portable power bank. Use the pairing cord in your kit to plug your mobile device or DocuSketch camera into the LED lamp to get some additional charge. You can expect 3-4 hours of shooting on a full camera charge.