Ways to Use the LED Lamp

Sufficient light is integral to obtaining the quality 360° images needed for your 360° Tour and, ultimately, your sketch:

• Be sure to turn on available light sources.
• If there is no power, the yellow LED lamp in the hardware kit will help. This lamp is surprisingly bright with three brightness levels. 
• Use the lamp by hand to flash light toward the area where the 360° image is to be taken. 
• You can also use the hook that extends from the top of the lamp to attach it to your tripod under the camera, as indicated in the photo below:

• There is also a magnet on the back of the light.  Use this to attach the light to a metal object, such as a metal clipboard.
  
• The light  can also be used as a portable power bank. Use the pairing cord in your kit to plug your mobile device or DocuSketch camera into the LED lamp to get some additional charge. You can expect 3-4 hours of shooting on a full camera charge.