---
title: "Ricoh"
slug: "ricoh-theta"
updated: 2026-09-08T19:54:53Z
published: 2026-09-08T19:54:53Z
canonical: "help.docusketch.com/ricoh-theta"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.docusketch.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Ricoh Theta

## Camera Overview

**Supported models:** SC2 (for business), X and Z1

- The back of the camera is indicated by the small WiFi screen.
- One side of the camera has 4 buttons:
  - Top button — power button.
  - The second button — Wi-Fi button (used when pairing with your device or to refresh the connection).
  - We do not use the bottom two buttons.

![](https://cdn.document360.io/44ab0a33-ef30-48c0-a1ca-99e5e06190eb/Images/Documentation/New%20Ricoh(1).png?sv=2026-02-06&spr=https&st=2026-11-01T22%3A15%3A31Z&se=2026-11-01T23%3A15%3A31Z&sr=c&sp=r&sig=TfdtRidkawzJiywf9kCB88nQIiLDoWio4o6%2FMdYlC3U%3D)

## How to Pair Your Device and Camera

- Press the **p****ower button**. The button will light up and icons will display on the Wi-Fi screen (if the Wi-Fi signal is flashing, it indicates the camera is NOT connected to your device).
- Go to the **Wi-Fi settings** on your device and look for the Wi-Fi hotspot for the camera.
- Click on the hotspot that begins with "**THETA**."
- The password will be the **8-digit serial number** that follows the letters ("YP" in the screenshot below) after the Wi-Fi name:

![](https://cdn.document360.io/44ab0a33-ef30-48c0-a1ca-99e5e06190eb/Images/Documentation/Networks(4).png?sv=2026-02-06&spr=https&st=2026-11-01T22%3A15%3A31Z&se=2026-11-01T23%3A15%3A31Z&sr=c&sp=r&sig=TfdtRidkawzJiywf9kCB88nQIiLDoWio4o6%2FMdYlC3U%3D)

The password can be confirmed by looking at the bottom of the camera:

![](https://cdn.document360.io/44ab0a33-ef30-48c0-a1ca-99e5e06190eb/Images/Documentation/Theta(1).png?sv=2026-02-06&spr=https&st=2026-11-01T22%3A15%3A31Z&se=2026-11-01T23%3A15%3A31Z&sr=c&sp=r&sig=TfdtRidkawzJiywf9kCB88nQIiLDoWio4o6%2FMdYlC3U%3D)

- Once the connection is established between the camera and your device, the WiFi signal on the camera should remain solid.
- Your device is going to indicate there is no internet connection. This is fine. This is merely pairing your camera with your device.
- Camera is NOT connected to the internet. The camera and device have a connection.
- Your device may be indicating it cannot connect to the camera. This error message can be ignored.
- Note that only one device can pair with the camera at a time.

![](https://cdn.document360.io/44ab0a33-ef30-48c0-a1ca-99e5e06190eb/Images/Documentation/No%20connection(1).png?sv=2026-02-06&spr=https&st=2026-11-01T22%3A15%3A31Z&se=2026-11-01T23%3A15%3A31Z&sr=c&sp=r&sig=TfdtRidkawzJiywf9kCB88nQIiLDoWio4o6%2FMdYlC3U%3D)

The next time you turn your camera on, it will automatically pair with your device (there is no need to enter your password every time).

**Note:** If you get a new device or reinstall the DocuSketch app, you will need to follow this process again.